" /> #SOTBIT_REGIONS_UF_GEO#
ООО "Уфимский Завод Металлорукавов"
450015, Russia, Ufa, K.Marx str. 67
:

ул. Ленина 49
Installation and safety regulations for UZM's PTFE hoses

Installation and safety regulations for UZM's PTFE hoses

When transporting a hot medium along the sleeve, do not touch the flexible part of the exposed areas of the body.
Choose the right length of the hose.
Remember that the hose does not work on twisting.
Hot.
Avoid strong lateral shifts.
Avoid excessive bending of the hose.
Avoid moving the hose by dragging, if necessary, use a protective cover.
Avoid twisting the hose during angular movements.
Remember, the bend of the hose and the direction of movements should be in the same plane.
When installing, use two keys.
When mounting the hose in a suspended state, use a support roller.
Do not forget to use the stand to comply with the minimum bending radius of the hose.
When mounting, move the hose in only one plane.
Do not forget, when welding the hose in place, it is necessary to cool down the weld.
Don't let it twist on the axis.
While dismantling the hose from the coil, unwind it gently, and do not pull.
Install the hose only perpendicular to vibration.